TLE: Plumbing Part 6

51) If you install a soil pipe, what is the standard pitch or slope?
a. 5%
b. 10%
c. 2%
d. 1%

52) If you put source of potable water, what is the minimum safe distance from the septic tank?
a. 15 meters
b. 10 meters
c. 5 meters
d. 20 meters

53) No cesspool, septic tank or drain fields shall be located within how many meter radius from the well?
a. 15 meters
b. 10 meters
c. 50 meters
d. 45 meters

54) If you plan to drill for a well that can supply water for public use, what is the minimum meter radius from a well to the residences?
a. 150 meters
b. 100 meters
c. 50 meters
d. 200 meters

55) Every trap for bath tubs, lavatories, sink, and other similar fixture shall be _________.
a. self-regulating
b. tight
c. fix
d. self cleaning

56) There should be no concrete sanitary sewers existing within how many meter radius from the well?
a. 15 meters
b. 10 meters
c. 50 meters
d. 45 meters

57) The standard length of a PVC pipe is _________.
a. 12 ft.
b. 2.0 m
c. 6.0 m
d. 10 ft.

58) If you want to estimate the number of G.I. pipes needed from your house to the main supply, what is the standard length of a G.I. pipe that you are going to use?
a. 20.0 m
b. 6 ft.
c. 3.0 m
d. 20 ft.

59) If you want to estimate the number of PVC pipes needed from your house to the main supply, what is the standard length of a PVC pipe that you are going to use?
a. 20.0 m
b. 6 ft.
c. 3.0 m
d. 20 ft.

60) All plumbing fixtures must have P-trap, EXCEPT:
a. lavatory
b. water closet
c. sink
d. bath tub

Key Answers, Explanations, Notes, and Concepts

51) If you install a soil pipe, what is the standard pitch or slope?
a. 5%
b. 10%
c. 2%
d. 1%

Answer: c. 2%


52) If you put source of potable water, what is the minimum safe distance from the septic tank?
a. 15 meters
b. 10 meters
c. 5 meters
d. 20 meters

Answer: a. 15 meters
This item's explanation was limited to the author's knowledge and research, thus incomplete. If you have any insights and corrections kindly comment below. It will surely be helpful for our future use.

53) No cesspool, septic tank or drain fields shall be located within how many meter radius from the well?
a. 15 meters
b. 10 meters
c. 50 meters
d. 45 meters

Answer: d. 45 meters
This item's explanation was limited to the author's knowledge and research, thus incomplete. If you have any insights and corrections kindly comment below. It will surely be helpful for our future use.

54) If you plan to drill for a well that can supply water for public use, what is the minimum meter radius from a well to the residences?
a. 150 meters
b. 100 meters
c. 50 meters
d. 200 meters

Answer: b. 100 meters
This item's explanation was limited to the author's knowledge and research, thus incomplete. If you have any insights and corrections kindly comment below. It will surely be helpful for our future use.

55) Every trap for bath tubs, lavatories, sink, and other similar fixture shall be _________.
a. self-regulating
b. tight
c. fix
d. self cleaning

Answer: d. self cleaning

Self cleaning- installing the PermaFLOW self-cleaning, green drain system now will keep things running smoothly.

Made of recyclable components, the PermaFLOW self cleaning drain system provides the features of conventional P-traps used with sinks and lavatories, but creates flow turbulence to break down and propel debris away.

56) There should be no concrete sanitary sewers existing within how many meter radius from the well?
a. 15 meters
b. 10 meters
c. 50 meters
d. 45 meters

Answer: a. 15 meters

57) The standard length of a PVC pipe is _________.
a. 12 ft.
b. 2.0 m
c. 6.0 m
d. 10 ft.

Answer: d. 10 ft.

This item's explanation was limited to the author's knowledge and research, thus incomplete. If you have any insights and corrections kindly comment below. It will surely be helpful for our future use.

58) If you want to estimate the number of G.I. pipes needed from your house to the main supply, what is the standard length of a G.I. pipe that you are going to use?
a. 20.0 m
b. 6 ft.
c. 3.0 m
d. 20 ft.

Answer: b. 6 ft.

Galvanized Iron Pipes (GI Pipes) and Non Plasticized Poly Vinyl Chloride Pipes (PVC Pipes) are most commonly used for internal plumbing system for residential homes. Specifications of GI pipes. G.I. pipes are made of hot and rolled coils of specified thickness.

59) If you want to estimate the number of PVC pipes needed from your house to the main supply, what is the standard length of a PVC pipe that you are going to use?
a. 20.0 m
b. 6 ft.
c. 3.0 m
d. 20 ft.

Answer: c. 3.0 m

60) All plumbing fixtures must have P-trap, EXCEPT:
a. lavatory
b. water closet
c. sink
d. bath tub

Answer: b. water closet

lavatory- a lavatory is a small sink installed near a water closet for primarily hand washing.
water closet- is a toilet.


sink-  plumbing fixture that people commonly utilize for dish-washing, washing hands, etc.


bath tub- is a container for holding water in which a person or animal may bathe. Most modern bathtubs are made of thermoformed acrylic, porcelain-enameled steel, fiberglass-reinforced polyester, or porcelain-enameled cast iron.



Comments, Suggestions, Corrections, and Clarifications are highly appreciated. Kindly put those in the comments section. Fighting!

Comments

Post a Comment

Popular posts from this blog

LET Reviewers, Books, and PDFs (Organized)

Image
LET Reviewer Reliable File (Organized) LET Reviewer Reliable File (Organized) TLE Major Reviewer Business Math Carpentry Cometology Drafting Electrical 1 Electrical 2 Entrepreneurship Foods Plumbing     The following files and compilation of reviewers are free and working. Please do not overwhelm yourself but only review and use what you need. If you have difficulty accessing the files, kindly  Follow  us on this Blog and  Request Access  after clicking the PDF URL or DM us on Twitter so we can get notified of your request.            You can share this Blog with your friends only by sharing the Blog's link  Privately  or through messages or emails. We are also pleasing you  NOT to repost this website to any Public Platforms  such as  Facebook Groups ,  Posts , and  Stories  so there will be lesser possibility that our website can be b anned or reported by exploitative people.            Thank you for your patience and understanding.      Wishing you all the best. Fighting! For the
Read more

TLE: Plumbing Part 1

Image
  1. A person who installs pipes, fixtures and other apparatus to convey and supply water in buildings and to dispose and discharge waste water. a. Carpenter b. Plumber c. Mason d. Mechanic 2. It is a receptacle or vault used to collect organic waste discharged from the house sewer. a. Septic tank b. Manhole c. Water tank d. Waste tank 3. The semi-liquid substance accumulated at the bottom of the septic tank. a. Scum b. Sediment c. Sludge d. Silt 4. An underground tunnel that carries off the drainage and waste matter from a home or town is called: a. Drainage system b. Fixture c. Sewerage d. Sewer 5. The pipe that conveys waste from various fixture other than from the water closet. a. Waste pipe b. Soil pipe c. Vent pipe d. Drain pipe 6. It is a fitting or device that provides liquid seal to prevent the back passage of air. a. Loop b. Fixture c. Sewer d. Trap 7. The tools used to tighten or loosen hexagonal fittings like unions and other metal fittings. a
Read more

We're having a short break.

Image
                               "Quality over quantity"                          We suggest reading first the modules and materials. We realized that it was easier to study and relate to the following questions when we at least have a piece of prior knowledge and concepts to the questions we are posting.                Hope you are all doing great! Until then, see you all and  Fighting! Reviewers:  https://letreviewerdailytle.blogspot.com/2022/03/let-reviewer-pdfs-organized.html
Read more

Drafting Notes

Image
  Resource: PNU- TLE Drafting Concept of Drafting  In most cases before making the final plan it takes the form of sketches and drawing  Sketches usually precede the making of scale drawing of an object.  An attempt to make something without having a definite plan usually results in waste of materials and time as well as in a poorly constructed project. DRAFTING EQUIPMENT In order to do planning or drafting work it is first necessary to learn the names of the tools the draftsman uses and the way he uses them to produce a good drawing. In addition it is necessary to learn certain rules and regulations which are the principles of good drafting.  Drawing Pencils - Drawing pencils is made of a much better grade of graphite, commonly called lead, than the ordinary writing pencils so it is possible to draw lines which are of uniform blackness and to do better quality of line work. - The hardest of the drawing pencils is the 9H. The next hardest in order are the 8H, 7h, 6H, 5H, 4H, 3H, 2H
Read more

About this Blog

Image
            Hi. I'm Franz. A third-year college student taking Bachelor of Technical Teacher Education Major in Automotive Technology at the time being.           I am doing this blog for the purpose of reviewing myself for the Licensure Examination Test. You might tell that it's way too early for me to review. That is also why I want to take advantage of it. With no pressure, here is where I will post and review 10 questions daily. I will also compile notes, research, and explanations I've gathered. With my friends, we're also planning to have a weekly review in the future.           Since you already have an access to this blog, I am hoping that you put this to good use. You can review this daily like how I do, read this in one go, or occasionally when you're on a bus or on your couch.            This blog is still in the process. Questions and key answers are gathered from reliable sources while added explanations could be limited to my own research and understan
Read more

TLE: Plumbing Part 2

Image
11) A schedule 40 pipe is: a. Thicker than schedule 20 b. Thicker than schedule 80 c. Thinner than schedule 10 d. None among the choices 12) What material is used to seal off threaded fittings to avoid leakage? a. Masking tape b. Teflon tape c. Scotch tape d. Adhesive gum 13) What must be installed to prevent siphonage or backflow of the water seal in the drainage system? a. Vent pipe b. Drain pipe c. Soil pipe d. Cleanout 14) Which of the following is NOT required by the National Plumbing Code? a. Drainage pipe should be inclined properly for a downward gravity flow of water. b. Drainage pipe should be provided with adequate cleanout. c. No vent pipe is needed. d. All pipe joints must be well-fitted and tightly connected. 15) What is the ideal inclination of a horizontal waste pipe as recommended by the National Plumbing Code? a. 2% slope b. 3% slope c. 4% slope d. 0% slope or level position 16) For purposes of troubleshooting in case of stoppage of flow, what must be installed in the
Read more

TLE: Carpentry and Masonry Part 3

Image
21) Which is considered to be the oldest and most commonly used building material? a. Cement b. Wood c. Steel d. Sand 22) A wood which is obtained from conifers and are used for framing? a. Hard wood b. Soft wood c. Dark wood d. Brown wood 23) Which wood is obtained from deciduous trees? a. Hard wood b. Soft wood c. Dark wood d. Brown wood 24) Which is a binding agent that reacts with water to form a hard stone-like substance? a. Glue b. Cement c. Mortar d. Grout 25) Which term refers to inert materials when bound together into a conglomerated mass from concrete? a. Aggregates b. Gravel c. Cement d. Water 26) A lumber that has been sawed, edged, and trimmed in which cutting marks are visible is ________. a. rough b. smooth c. dressed d. worked 27) Which lumber has been put through planing machine which gives fine surface? a. rough b. smooth c. dressed d. worked 28) Which lumber that has been dresses and matched, ship lapped, or patterned? a. rough b. smooth c. dressed d. worked 29) Whi
Read more

TLE: Plumbing 60 Items

Image
1) A person who installs pipes, fixtures and other apparatus to convey and supply water in buildings and to dispose and discharge waste water. a. Carpenter b. Plumber c. Mason d. Mechanic 2) It is a receptacle or vault used to collect organic waste discharged from the house sewer. a. Septic tank b. Manhole c. Water tank d. Waste tank 3) The semi-liquid substance accumulated at the bottom of the septic tank. a. Scum b. Sediment c. Sludge d. Silt 4) An underground tunnel that carries off the drainage and waste matter from a home or town is called: a. Drainage system b. Fixture c. Sewerage d. Sewer 5) The pipe that conveys waste from various fixture other than from the water closet. a. Waste pipe b. Soil pipe c. Vent pipe d. Drain pipe 6) It is a fitting or device that provides liquid seal to prevent the back passage of air. a. Loop b. Fixture c. Sewer d. Trap 7) The tools used to tighten or loosen hexagonal fittings like unions and other metal fittings. a. Pipe vise b. Pliers c. Wrenches
Read more

Putting it into a Habit

Image
                                    As mentioned, we are not only reviewing topics but we are also trying to put the habit of answering questions/exams everyday, para pagdating sa mismong exam ay mas madali na para sa atin. So how do we answer those questions? We apply the  CARL Method C-omprehenssion Basahin munang mabuti ang tanong. Iemphasize ang context ng tanong dahil ito yung tutulong sayo na pumili ng best answer. Hindi tayo naghahanap ng tamang sagot kundi ng pinakatamang sagot. (Malaking tulong rin para sakin yung google translate sa blog na makikita sa gilid) A-nticipate Nang hindi tumitingin sa pagpipilian, pagkabasa mo ng tanong ianticipate mo muna kung ano yung mga idea na pumapasok sa isip mo. R-emoval Sa apat na pagpipilian, Isa lang ang tamang sagot. At mas madali pumili ng mali kaysa sa pinakatama. Magtanggal ng dalawa na sa palagay mo ay hindi tama. L-everage Ngayon sa dalawang pagpipilian mo na sa palagay mo na tama dahil nagtanggal ka ng mali, tumaas na yung chance
Read more