TLE: Drafting Part 10

 91.To completely describe a cone, sphere, and rectangular pyramid the number of views needed is ______.

A. One
B. Two
C. Three
D. Six

92.This line is projected as a shorter line in a drawing.
A. Incline line
B. Vertical line
C. Curve line
D. Horizontal line

93.Boxing method is the most widely used method of drawing a/an _____.
A. Isometric view
B. Pictorial view
C. Mechanical view
D. Perspective view

94.Two intersecting lines which form right angles are called ____.
A. Straight lines
B. Parallel lines
C. Perpendicular lines
D. Tangent lines

95.A polygon is classified according to the number of sides. What do you call a four – sided polygon?
A. Pentagon
B. Quadrilateral
C. Hexagonal
D. Octagon

96.How many meters is thirty feet?
A. 3 meters
B. 30 meters
C. 12 meters
D. 9 meters

97.Drafting material used for fastening the drawing paper on the drawing table.
A. Compass
B. Divider
C. Masking tape
D. Triangle

98.The main function of this tool is to reproduce the measurements of an object to any size.
A. Compass
B. Protractor
C. Triangles
D. Triangular scales

99.This drafting tool is used to protect the rest of drawing when removing unnecessary lines.
A. Erasing shield
B. Eraser
C. Masking tape
D. Pencil sharpener

100.Best tool when measuring arcs, angles, and circles.
A. Eraser
B. Triangular scale
C. Protractor
D. Divider 


Key Answers, Explanations, Notes, and Concepts

91.To completely describe a cone, sphere, and rectangular pyramid the number of views needed is ______.
A. One
B. Two
C. Three
D. Six

Answer: B. Two


92.This line is projected as a shorter line in a drawing.
A. Incline line
B. Vertical line
C. Curve line
D. Horizontal line

Answer: A. Incline line

Incline line- a line which is oblique to the plane of the horizon.
This item's explanation is limited to author's knowledge and research, thus incomplete. If you have any insights and correction kindly comment it below. It will surely be helpful on our future use.

93.Boxing method is the most widely used method of drawing a/an _____.
A. Isometric view
B. Pictorial view
C. Mechanical view
D. Perspective view

Answer: A. Isometric view
    Since Isometric creates objects that was undistorted, box method is an ideal base of the drawimg.



94.Two intersecting lines which form right angles are called ____.
A. Straight lines
B. Parallel lines
C. Perpendicular lines
D. Tangent lines

Answer: C. Perpendicular lines

Parallel lines- lines in a plane that are always the same distance apart.


Perpendicular lines- lines are defined as two lines that meet or intersect each other at right angles (90°).


Tangent lines- is a line that just touches the graph of the function at the point in question and is “parallel” (in some way) to the graph at that point.


95.A polygon is classified according to the number of sides. What do you call a four – sided polygon?
A. Pentagon
B. Quadrilateral
C. Hexagonal
D. Octagon

Answer: B. Quadrilateral

Pentagon- 5 sides
Quadrilateral - 4 sides
Hexagonal- six sides
Octagon- eight sides

96.How many meters is thirty feet?
A. 3 meters
B. 30 meters
C. 12 meters
D. 9 meters

Answer: D. 9 meters
1 feet = 0.3048 m
30feet x 1 ft.
? 0.3048 m
=9.144 m


97.Drafting material used for fastening the drawing paper on the drawing table.
A. Compass
B. Divider
C. Masking tape
D. Triangle

Answer: C. Masking tape

Compass- more accurately known as a pair of compasses, is a technical drawing instrument that can be used for inscribing circles or arcs.


Divider- instrument for measuring, transferring, or marking off distances, consisting of two straight adjustable legs hinged together and ending in sharp points.


Masking tape- has a lower tack. It is intended to hold blueprints to a drawing board or light table, and to pull off easily without damaging the drawing.


Triangle- is a drafting tool used to draw accurate parallel lines, vertical lines, and other angled lines.


98.The main function of this tool is to reproduce the measurements of an object to any size.
A. Compass
B. Protractor
C. Triangles
D. Triangular scales

Answer: D. Triangular scales

Compass- more accurately known as a pair of compasses, is a technical drawing instrument that can be used for inscribing circles or arcs.
Protractor- is a tool used in drafting to draw and measure angles other than 30°, 45°, 60°, or 90°.


Triangles- is a drafting tool used to draw accurate parallel lines, vertical lines, and other angled lines.
Triangular scales- is a ruler that has a 3-lobed cross-section with 6 different types of scales on the edges (2 on each face) used for measuring and preparing scale drawings such as blueprints and maps. It is also called an architect's scale.
99.This drafting tool is used to protect the rest of drawing when removing unnecessary lines.
A. Erasing shield
B. Eraser
C. Masking tape
D. Pencil sharpener

Answer: A. Erasing shield

Erasing shield- is a thin sheet of stainless steel or plastic with slots and holes of different shapes. They are designed to allow erasers to be used through them to erase lines and text without removing lines close by which do not need to be (or should not be) erased.

100.Best tool when measuring arcs, angles, and circles.
A. Eraser
B. Triangular scale
C. Protractor
D. Divider 

Answer: C. Protractor

Protractor- is a tool used in drafting to draw and measure angles other than 30°, 45°, 60°, or 90°.

Comments, Suggestions and Corrections are highly appreciated. Kindly put those in the comments section. Fighting!

Comments

Post a Comment

Popular posts from this blog

TLE: Plumbing Part 1

Image
  1. A person who installs pipes, fixtures and other apparatus to convey and supply water in buildings and to dispose and discharge waste water. a. Carpenter b. Plumber c. Mason d. Mechanic 2. It is a receptacle or vault used to collect organic waste discharged from the house sewer. a. Septic tank b. Manhole c. Water tank d. Waste tank 3. The semi-liquid substance accumulated at the bottom of the septic tank. a. Scum b. Sediment c. Sludge d. Silt 4. An underground tunnel that carries off the drainage and waste matter from a home or town is called: a. Drainage system b. Fixture c. Sewerage d. Sewer 5. The pipe that conveys waste from various fixture other than from the water closet. a. Waste pipe b. Soil pipe c. Vent pipe d. Drain pipe 6. It is a fitting or device that provides liquid seal to prevent the back passage of air. a. Loop b. Fixture c. Sewer d. Trap 7. The tools used to tighten or loosen hexagonal fittings like unions and other metal fitting...
Read more

TLE: Drafting Part 5

Image
  41.For a professional looking section detail, which additional feature shall a drafter include to really portray the drawing? A.Line symbols B.Common section line symbols for materials C.Material line weight D.Symmetric object line 42.There are several types of section- a full section which the cutting plane line passes across entire object and half section on which the cutting plane passes through an object which is_. A.Symmetrical B.Orthographic C.Offset drawing D.Common section 43.When a section is to be detailed according to the intended parts, assembly is called_. A.Assembly of parts B.Assembly section C.Assembly of materials D.Assembly of common section 44.The world has adopted the metric system of dimensioning but some countries used it voluntarily depending on the situation they practice. What is the name of their approach? A.Unidirectional system B.Dual dimensioning system C.Aligned system D.Position dimensioning 45.A third-world country even for its stage can’t neglect ...
Read more

TLE: Drafting 100 Items

Image
  1.When a designer or an ordinary person translates his or her own design idea with the use of paper and pencil, what is the name of the activity? A. Architectural delineation B.Freehand Sketching C.Geometric Construction D.Drafting 2.After two dimensional drawings are done and all the shapes and sizes being laid-out, the next step to be executed to complete the process is_. A.Dimensioning B.Tolerancing C.Specifications D.Sectional Drawing 3.With the help of drawing instruments such as T-square and triangles, one produces quick and accurate delineations for an intended project. The process is considered as: A. Drafting B. Pictorial Drawing C. Graphics D. Shape and Size Descriptions 4.Technical drafting involves the manipulation of the elements of geometry to make accurate description of shapes. Which term is referred to by engineering’s and drafting professionals all over world? A. Blueprint Reading B. Geometric Construction C. Line Weight D. Measurement 5.Objects to be drawn are ...
Read more